Aluminium Silicon Magnesium Alloy Spherical
$0.00
In StockAluminium Silicon Magnesium Alloy Spherical
| Product |
Aluminium Silicon Magnesium Alloy Spherical |
| Colour | N/A |
| Purity | 99% |
| Particle size | 1-5μm (Customizable) |
| Ingredient/MF | AlSi10Mg |
| Product Code | NCZ-CP-291/20 |
| CAS No | N/A |
| Oxygen Content | ≤300 ppm |
| Apparent density | ≥1.25 g/cc |
Description:
Aluminum alloys (or aluminum alloys; see spelling differences) are alloys in which aluminum (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc.
There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. About 85% of aluminum is used for wrought products, for example rolled plate, foils and extrusions. Cast aluminum alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys.
The most important cast aluminum alloy system is Al–Si, where the high levels of silicon (4.0–13%) contribute to give good casting characteristics. Aluminum alloys are widely used in engineering structures and components where light weight or corrosion resistance is required.
Alloys composed mostly of aluminum have been very important in aerospace manufacturing since the introduction of metal-skinned aircraft. Aluminum-magnesium alloys are both lighter than other aluminum alloys and much less flammable than other alloys that contain a very high percentage of magnesium. Aluminum alloy surfaces will develop a white, protective layer of aluminum oxide if left unprotected by anodizing and/or correct painting procedures.
In a wet environment, galvanic corrosion can occur when an aluminum alloy is placed in electrical contact with other metals with more positive corrosion potentials than aluminum, and an electrolyte is present that allows ion exchange. Referred to as dissimilar-metal corrosion, this process can occur as exfoliation or as intergranular corrosion. Aluminum alloys can be improperly heat treated. This causes internal element separation, and the metal then corrodes from the inside out.
Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Description
Description
Note: For pricing & ordering information, please contact us at sales@nanochemazone.com
Please contact us for quotes on Larger Quantities and customization. E-mail: contact@nanochemazone.com
Customization:
If you are planning to order large quantities for your industrial and academic needs, please note that customization of parameters (such as size, length, purity, functionalities, etc.) is available upon request.
NOTE:
Images, pictures, colors, particle sizes, purity, packing, descriptions, and specifications for the real and actual goods may differ. These are only used on the website for the purposes of reference, advertising, and portrayal. Please contact us via email at sales@nanochemazone.com or by phone at (365) 888-7013 if you have any questions.
Related products
-
Indium Selenide Powder
Product Name: Indium Selenide Powder (In2Se3, >99.9%, APS: 40-70µm)
Product Indium Selenide Powder Cat No NCZ-NSC815/20 CAS No 12056-07-4 Purity >99.9% APS 40-70µm Molecular Formula In2Se3 Molecular Weight 466.516 g/mol Density 5.80 g/cm³ Solubility in water Insoluble in cold water Indium Selenide Powder Properties /Description
Indium Selenide Powder is generally immediately available in most volumes. Nanochemazone produces many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural, and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research, and safety (MSDS) information are available, as is a Reference Calculator for converting relevant units of measurement.
Indium Selenide Related Information
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Tantalum Carbide Powder
Tantalum Carbide Powder (TaC, Purity: 99.9%, APS: 1000 nm, Cubic)
Product Tantalum Carbide Powder Cat No NCZ-MN-260/20 CAS No 12070-06-3 APS 1000 nm (customizable) Purity 99.9% Molecular Formula TaC Molecular Weight 192.96 g/mol Form Powder Color Gray Density 14.30 g/cm³ Melting Point 3,880 °C Boiling Point 4,780 °C Solubility Insoluble in water They are extremely hard, brittle, refractory ceramic materials with metallic electrical conductivity. They appear as brown-gray powders, which are usually processed by sintering.
Being important cermet materials, tantalum carbides are commercially used in tool bits for cutting applications and are sometimes added to tungsten carbide alloys.
The melting points of tantalum carbides peak at about 3880 °C depending on the purity and measurement conditions; this value is among the highest for binary compounds. Only tantalum hafnium carbide may have a slightly higher melting point of about 3942 °C, whereas the melting point of hafnium carbide is comparable to that of TaC.
Tantalum Carbide Application:
Tantalum Carbide Powder Applications
1. Tantalum carbide is often added to tungsten carbide/cobalt (WC/Co) powder attritions to enhance the physical properties of the sintered structure. It also acts as a grain growth inhibitors preventing the formation of large grains, thus producing materials of optimal hardness.
2. It is also used as a coating for steel molds in the injection molding of aluminum alloys. While providing a hard, wear-resistant surface, it also provides a low friction mold surface.
3. Tantalum carbide is also used in the production of sharp instruments with extreme mechanical resistance and hardness.
4. It is also used in tool bits for cutting tools.Tantalum carbide is widely used as a sintering additive in ultra-high temperature ceramics (UHTCs) or as a ceramic reinforcement in high-entropy alloys (HEAs) due to its excellent physical properties in melting point, hardness, elastic modulus, thermal conductivity, thermal shock resistance, and chemical stability, which makes it a desirable material for aircraft and rockets in aerospace industries.
Nanochemazone specializes in producing high purity Tantalum Carbide Powder with the smallest possible average grain sizes for use in the preparation of pressed and bonded sputtering targets and in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low-Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Powders are also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas. Our standard powder particle sizes average in the range of – 325 mesh, – 100 mesh, 10-50 microns, and submicron (< 1 micron). We can also provide many materials in the nanoscale range.
Tantalum Carbide Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Lanthanum Hafnium Zirconate Powder
Product Lanthanum Hafnium Zirconate Powder
Cat No NCZ-MN-258/20 CAS No 12031-48-0 APS 1-10 µM, 10-25 µM 25- 45 µM (Customizable) Purity 99.5% Form White, odorless Powder Density 6.05 g/cm3 Melting Point ~ 2680 deg C Solubility Insoluble in Water Formula La2Zr2O7 Lanthanum Hafnium Zirconate powder’s COA:
Hf 2.2% Fe 0.01% Na 0.01% Al 0.1% Si 0.1% Ca 0.005% Sr 0.02% Pb 0.001% Latest information about the manufacturing techniques of lanthanum zirconate (La2Zr2O7, LZ) Powder and La2Zr2O7 based thermal barrier coatings (TBCs). Lanthanum zirconate is a promising candidate material for TBC applications due to its lower thermal conductivity and higher thermal stability compared to other traditional TBC systems.
We can supply Lanthanum zirconate powder and target materials, welcome contact us!
Lanthanum zirconate ( La2Zr2O7 ), purity 3N5, primary particle size 3um, material XRD pure phase.
Lanthanum zirconate Applications:
Widely used in microelectronics, catalysts, ferroelectric materials, / lithium batteries, semiconductors, and other electronic fields.
Lanthanum zirconate Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Indium Gallium Arsenide Nanopowder
Product Name: Indium Gallium Arsenide Nanopowder (InGaAs, Purity: 99.9%, APS: < 100 nm)
Product Indium Gallium Arsenide Nanopowder Cat No NCZ-NSC814/20 CAS No 106097-59-0 Purity 99.9% APS < 100 nm Molecular Formula InGaAs Molecular Weight 259.46 g/mol Form Crystalline Powder Color White Density 5.68 g/cm³ Melting Point 844 °C Conclusion The specifications Confirm with enterprise standard Indium Gallium Arsenide Related Information
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Rubidium Selenide Powder
Product Name: Rubidium Selenide Powder (Rb2Se, >99%, APS: 40-70µm)
Product Rubidium Selenide Powder Cat No NCZ-NSC816/20 CAS No 31052-43-4 Purity >99 % Molecular Formula Rb2Se Molecular Weight 249.895 g/mol Form Powder Density 3220 kg/m-³ APS 1-5 µM (Can be customized) Rubidium Selenide Powder Properties /Description
Rubidium Selenide Powder is generally immediately available in most volumes. Nanochemazone produces many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural, and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research, and safety (MSDS) information are available, as is a Reference Calculator for converting relevant units of measurement.
Rubidium Selenide Related Information
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Zinc Selenide Powder
Product Name: Zinc Selenide Powder (ZnSe, >99.9%, APS: 40-70µm)
Product Zinc Selenide Powder Cat No NCZ-NSC817/20 CAS No 1315-09-9 Purity >99.9 % APS 40-70µm (Can be customized) Molecular Formula ZnSe Molecular Weight 144.35 g/mol Color Yellow Density 5.27 g/cm³ Melting Point 1525 °C Linear Expansion Coefficient 7.57×10-6 @ 20°C Young Modulus 67.2 GPa Thermal Conductivity 18 Wm Solubility in water Insoluble in water Zinc Selenide Powder Properties /Description
Zinc Selenide Powder is generally immediately available in most volumes. Nanochemazone produces many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural, and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research, and safety (MSDS) information are available, as is a Reference Calculator for converting relevant units of measurement.
Related Information:
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00
