Tungsten Micro Powder
$0.00
In StockTungsten Micro Powder
| Product |
Tungsten Micro Powder |
| CAS No. | 7440-33-7 |
| Appearance | Black Powder |
| Purity | 99.9% |
| APS | 0.3 to 40µm (Can be customized) |
| Iodine Adsorption | 1350 mg/g |
| Formula | W |
| Product Code | NCZ-NSC330/20 |
| Desnity | 19.3 g/cm3 |
Tungsten Micro Powder Description :
Tungsten micro Alloy Powder for the electronic package; Alloys for heat sinks; Anti-armor alloys Circuit breakers; Contacts and electrode materials; Contacts in a protective atmosphere; Electrodes for gas sensors; Microelectronics films; Penetrators; Protective coatings; Sintering additives; Switchgear; Thermal management; Transformer tap changer; Vacuum contactors; Vacuum load switches Tungsten, or wolfram, is a chemical element with the symbol W and atomic.
The name tungsten comes from the former Swedish name for the tungstate mineral scheelite, tungsten which means heavy stone.
Tungsten is a rare metal found naturally on Earth almost exclusively combined with other elements in chemical compounds rather than alone.
Its important ores include wolframite and scheelite. The free element is remarkable for its robustness, especially the fact that it has the highest melting point of all the elements discovered, melting at 3,422 °C.
It also has the highest boiling point, at 5,930 °C. Its density is times that of water, comparable with that of uranium and gold, and much higher than that of lead.
Polycrystalline tungsten is an intrinsically brittle and hard material (under standard conditions, when uncombined), making it difficult to work.
However, pure single-crystalline tungsten is more ductile and can be cut with a hard-steel hacksaw. Tungsten’s many alloys have numerous applications, including incandescent light bulb filaments, X-ray tubes as both the filament and target), electrodes in gas tungsten arc welding, superalloys, and radiation shielding.
Tungsten’s hardness and high density give it military applications in penetrating projectiles. Tungsten compounds are also often used as industrial catalysts.
Tungsten is the only metal from the third transition series that is known to occur in biomolecules that are found in a few species of bacteria and archaea. It is the heaviest element known to be essential to any living organism.
However, tungsten interferes with molybdenum and copper metabolism and is somewhat toxic to more familiar forms of animal life.
Tungsten Micro Powder Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
Description
Note: For pricing & ordering information, please contact us at sales@nanochemazone.com
Please contact us for quotes on Larger Quantities and customization. E-mail: contact@nanochemazone.com
Customization:
If you are planning to order large quantities for your industrial and academic needs, please note that customization of parameters (such as size, length, purity, functionalities, etc.) is available upon request.
NOTE:
Images, pictures, colors, particle sizes, purity, packing, descriptions, and specifications for the real and actual goods may differ. These are only used on the website for the purposes of reference, advertising, and portrayal. Please contact us via email at sales@nanochemazone.com or by phone at (365) 888-7013 if you have any questions.
Related products
-
Hafnium Carbide Powder
Product Hafnium Carbide Powder
Colour Gray Powder Purity ≥ 99.9% Particle size 1-10 µM (customizable) Ingredient/MF HfC Product Code NCZ-C-103/20 CAS Number 12069-85-1 Brief Description of Hafnium carbide powder HfC:
Hafnium carbide ( HfC) is a chemical compound of hafnium and carbon
With a melting point of about 3900 °C it is one of the most refractory binary compounds known.
However, it has low oxidation resistance, with the oxidation starting at temperatures as low as 430 °C
Hafnium carbide is usually carbon deficient and therefore its composition is often expressed as HfCx (x = 0.5 to 1.0). It has a cubic (rock-salt) crystal structure at any value of x
Application of Hafnium carbide powder HfC:
- Used for preparation of ultra-high temperature ceramics
- The reactant in the synthesis of hafnium-containing organometallic polymers
- Used as an additive in alloys
- Used in coatings
- Widely used in microelectronics, semiconductor, aerospace high-temperature resistant material, coating materials, ceramic materials, ceramic target material, etc.
Hafnium carbide Powder related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Tungsten Carbide Powder
Product Name: Tungsten Carbide Powder
Product Tungsten Carbide Powder Colour Grey Purity ≥ 99.9% Particle size 1-10 µM (customizable) Ingredient/MF WC Product Code NCZ-C-109/20 CAS Number 12070-12-1 Brief Description of WC Tungsten Carbide Powder
Tungsten carbide powder (chemical formula: WC ) is a chemical compound (specifically, a carbide ) containing equal parts of tungsten and carbon atoms.
In its most basic form, tungsten carbide is a fine Gray powder, but it can be pressed and formed into shapes for use in industrial machinery, cutting tools, abrasives, armor-piercing rounds, other tools and instruments, and jewelry.
Physical Properties of WC Tungsten Carbide Powder
Tungsten carbide has a high melting point at 2,870 °C (5,200 °F), a boiling point of 6,000 °C (10,830 °F) when under a pressure equivalent to 1 standard atmosphere (100 kPa), the thermal conductivity of 110 W·m−1·K−1, and a coefficient of thermal expansion of 5.5 µm·m−1·K−1.
Tungsten carbide is extremely hard, ranking about 9 on Mohs scale, and with a Vickers number of around 2600.
It has Young’s modulus of approximately 530–700 GPa, a bulk modulus of 630–655 GPa, and a shear modulus of 274 GPa.
It has an ultimate tensile strength of 344 MPa, the ultimate compression strength of about 2.7 GPa and a Poisson’s ratio of 0.31.
Chemical Properties of WC Tungsten Carbide Powder
There are two well-characterized compounds of tungsten and carbon, WC and tungsten semi abide, W2C.
Both compounds may be present in coatings and the proportions can depend on the coating method.
At high temperatures, WC decomposes to tungsten and carbon and this can occur during high-temperature thermal spray, e.g., in high-velocity oxygen fuel (HVOF) and high energy plasma (HEP) methods.
Application of WC Tungsten Carbide Powder
1 Used for Producing high capability nano-crystalline or superfine horniness alloy, hard-face abrasion-resistant spraying and petrochemical cracking catalyst;
- Used for chipless forming tools; Cutting tools; Mining tolls; Nano-composites (for enhanced hardness, strength, and wear resistance);
- Used for erosion-resistant coatings; wear-resistance coatings; Corrosion-resistant coatings; Wear-resistant parts
- To produce hard carbide.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Tantalum Boride Powder
MF: TaB Chemical Name Tantalum boride Powder
Color Gray EINECS 234-496-7 Purity: 99.9% Molecular weight: 191.76 Product Number: NCZ-SC-116/20 Cas Number: 12045-19-1 Density: 14.2 g/cm3 Tantalum Boride Powder Description:
Tantalum Boride Powder is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.
Tantalum Boride Related Information
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Chromium Diboride Powder
Product Name: Chromium Diboride Powder
MF: CrB2 Chemical Name Chromium Diboride Powder
Appearance silver, ceramic material EINECS 234-499-3 Purity: 99.9% Density: 5.20 g/cm3 Product Number: NCZ-NCD-117/20 Cas Number: 12007-16-8 RELATED INFORMATION
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Tantalum Carbide Powder
Product Tantalum Carbide Powder
Colour Brown-Gray Purity ≥ 99.9% Particle size 1-10 µM (customizable) Ingredient/MF TaC Product Code NCZ-C-105/20 CAS Number 12070-06-3 Tantalum Carbide Powder Description:
Tantalum carbides form a family of binary chemical compounds of tantalum and carbon with the empirical formula TaCx, where usually varies between 0.4 and 1.
They are extremely hard, brittle, refractory ceramic materials with metallic electrical conductivity.
They appear as brown-Gray powders, which are usually processed by sintering.
Being important cermet materials, tantalum carbides are commercially used in tool bits for cutting applications and are sometimes added to tungsten carbide alloys.
Properties of TaC Tantalum Carbide Powder:
Tantalum carbides have metallic electrical conductivity, both in terms of its magnitude and temperature dependence.
TaC is a superconductor with a relatively high transition temperature of TC = 10.35 K.
Application of TaC Tantalum carbide powder
- Widely used in the production of microwave absorbing materials, metal powder injection
molding material technology field.
- Used as all kinds of superhard material and powder metallurgy products additives etc.
- Used as a cutting tool.
- Used for delicate Ceramics.
- Hard wear-resistant alloy tools, tools, molds, and wear-resistant corrosion-resistant structural components additive, improve the toughness of the alloy.
- Tantalum carbide sintered shown in gold, watches can be made decorations.
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Product Name: CoCrW Alloy Powder
Product CoCrW Alloy Powder
CAS No. 7440-50-8/7440-47-3 Appearance Grey Purity 99.9% APS 1 – 5 Microns (Can be customized) Ingredient CoCrW Product Code NCZ-NSC-164/20 Description:
3D printing metal Powder Powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00
