Low Density Polyethylene Powder
$0.00
In StockLow-Density Polyethylene Powder
| Product |
Low-Density Polyethylene Powder |
| CAS No. | 9002-88-4 |
| Appearance | Powder |
| Purity | ≥99%, ≥99.9%, ≥95% (Other purities are also available) |
| APS | 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. |
| Ingredient | (C2H4)n |
| Product Code | NCZ-AE-120 |
Low-Density Polyethylene Description
Low-Density Polyethylene Powder is widely used because of its excellent cold resistance, heat resistance, chemical resistance and wear resistance.
It can increase the gloss and processing properties of the product. As a lubricant, its chemical stability, good electrical properties.
Low-Density Polyethylene Powder has Excellent resistance (no attack) to dilute and concentrated acids, alcohols, bases and esters, good resistance (minor attack) to aldehydes, ketones and vegetable oils.
Limited resistance (moderate attack suitable for short-term use only) to aliphatic and aromatic hydrocarbons, mineral oils, and oxidizing agents, and poor resistance, and not recommended for use with halogenated hydrocarbons.
Low-Density Polyethylene Related Information
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
Description
Description
Note: For pricing & ordering information, please contact us at sales@nanochemazone.com
Please contact us for quotes on Larger Quantities and customization. E-mail: contact@nanochemazone.com
Customization:
If you are planning to order large quantities for your industrial and academic needs, please note that customization of parameters (such as size, length, purity, functionalities, etc.) is available upon request.
NOTE:
Images, pictures, colors, particle sizes, purity, packing, descriptions, and specifications for the real and actual goods may differ. These are only used on the website for the purposes of reference, advertising, and portrayal. Please contact us via email at sales@nanochemazone.com or by phone at (365) 888-7013 if you have any questions.
Related products
-
PLGA Nanoparticles
Product PLGA Nanoparticles
CAS No. 26780-50-7 Appearance Powder Purity ≥99%, ≥99.9%, ≥95% (Other purities are also available) APS 50-100 nm, 1-5 µM, 10-53 µM (Size Can be customized), Ask for other available size ranges. Ingredient (C3H4O2)m x (C2H2O2)n Product Code NCZ-NP-386/22 PLGA Nanoparticles Description
Poly(D, L-lactide-co-glycolide)- DLG 75-2A (PLGA) has been one of the most attractive Biodegradable and biocompatible polymers used to fabricate devices for diagnostics and other applications of clinical and basic science research, including vaccine, cancer, cardiovascular disease, and tissue engineering. In addition, PLGA and its copolymers are Essential in designing nanoparticles with desired characteristics such as biocompatibility, biodegradation, particle size, surface properties, drug release, and targetability and exhibit a wide range of erosion times. PLGA has been approved by the US FDA for use in drug delivery complex formulation and biodegradable orthopedic Medical implants.
PLGA Nanoparticles Related Information:
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Cationic Polyacrylamide
Product Name: Cationic Polyacrylamide (Purity: 99.9%, APS: 40-50 µm, C-PAM for short)
Product Cationic Polyacrylamide
Cat No NCZ-NSC909/20 CAS No 9003-05-8 APS 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. Purity ≥99%, ≥99.9%, ≥95% (Other purities are also available) Molecular Formula C3H5NO Molecular Weight 3-16 Million (adjustable) Color off-white pH 4-9 Solid Content ≥88 % Degree of Hydrolysis Low, Medium, High Dissolution Time ≤1hour Hydrolysis degree 20-23% Recommended Dissolution Concentration 0.1 – 0.3% Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Polyether ketone PEEK Resin Powder
Product Polyether Ketone PEEK Resin Powder
CAS No. 29658-26-2 Appearance Powder Purity ≥99%, ≥99.9%, ≥95% (Other purities are also available) APS 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range.
Ingredient C19H14O3 Product Code NCZ-AE-189 DESCRIPTION
1.Mechanical properties of PEEK is a toughness and rigidity, and balance of plastic. Particularly its excellent resistance to alternating stress fatigue is the most outstanding of all plastics can be comparable with the alloy.
2.Self-lubricating plastic PEEK at all with superior sliding properties, suitable for demanding low coefficient of friction and abrasion uses. In particular, carbon fiber, graphite mixing proportion of each of the modified PEEK better self-lubricating properties.
3.Chemical resistance (corrosion resistance) PEEK has excellent chemical resistance in the usual chemicals that can dissolve or destroy it’s only concentrated sulfuric acid, its corrosion resistance and nickel steel similar.
4.PEEK is a very stable flame-retardant polymer,1.45mm thick sample, without any flame retardant can achieve the highest standards.
5.The peeling resistance of PEEK peeling resistance is very good, it can be made of or coated with a thin wire, may be used in harsh conditions.
6.The fatigue resistance of PEEK resin at all has the best fatigue resistance.
7.The radiation resistance of high radiation are strong, more than a common resin best radiation resistance of polystyrene. Radiation does can be made up 1100Mard can still maintain good insulation, high-performance.
8.Hydrolysis resistance PEEK and its composites and high-press steam from water, the chemical effects of this material products made of continuous use at high temperature and pressure water can be still maintain excellent properties.
9.PEEK resin has a higher melting point (334℃) and glass transition temperature (143℃), continuous use temperature of 260℃, its 30% GF or CF-reinforced grades load thermal deformation temperature up to 316℃.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
$0.00 -
PTFE Nanopowder
PTFE Nanopowder [Polytetrafluoroethylene, (C2F4) n, Purity: 99.9%]
Product Polytetrafluoroethylene Nanopowder
Cat No NCZ-CP-509/20 CAS No 9002-84-0 APS 50-100 nm, 1-5 µM, 10-53 µM (Size Can be customized), Ask for other available size ranges. Purity ≥99%, ≥99.9%, ≥95% (Other purities are also available) Density 0.7 – 0.9kg / L Color Light Gray, White Melting Point 279-326 °C SSA 17 m²/g Temperature Range 190 °C to 250 °C Standard Relative Density 2.15-2.17 kg/L Containing Water Scale ≤ 0.04 % Bulk Specific Gravity 350 g/L Thermal conductivity 0.25 W/(m•K) Application Used in the plastic, textile printing, Lubricant and dying industries PTFE Nanopowder Description
PTFE Nanopowder is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Nanochemazone produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.
PTFE Nanopowder Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Polycyclohexylene dimethylene Terephthalate
Product Name: Polycyclohexylene dimethylene Terephthalate ((C10H8O4)n,Purity: >99.9% )
Product Polycyclohexylene dimethylene Terephthalate
Cat No NCZ-NSC875/20 CAS No 24936-69-4 Purity ≥99%, ≥99.9%, ≥95% (Other purities are also available) Molecular Formula (C10H8O4) n Density 1.57g/cm³ Melting Point 285 °C Tensile strength 93.8 MPa Tensile modulus 1.16E+6psi Tensile Stress (Break) 14500psi Tensile Strain (Break) 1.8% Flexural Modulus (73°F) 1.04E+6psi Flexural Stress (73°F) 21000psi Surface Resistivity 1.0E+15ohms Volume Resistivity > 1.0E+15 ohms•cm Electric Strength 840 V/mil Dielectric Strength 27.1 kV/mm Modulus of Elasticity 7.05 GPa APS 1-5 µM, 10-53 µM (Can be customized), Ask for other available size range. Polycyclohexylene dimethylene Terephthalate Properties /Description
Polycyclohexylene dimethylene Terephthalate is generally immediately available in most volumes. Nanochemazone produces many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural, and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research, and safety (MSDS) information are available, as is a Reference Calculator for converting relevant units of measurement.
Related Information
Storage Conditions:
Airtight sealed, avoid light and keep dry at room temperature.
Please contact us for customization and price inquiry
Email: contact@nanochemazone.com
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00 -
Calcium Polystyrene Sulfonate
Product Name: Calcium Polystyrene Sulfonate Nanopowder
Product Calcium Polystyrene Sulphonate Nanopowder Cat No NCZ-MN-085/20 CAS No 37286-92-3 APS 50-100 nm, 1-5 µM, 10-53 µM (Size Can be customized), Ask for other available size ranges. Purity ≥99%, ≥99.9%, ≥95% (Other purities are also available) Molecular Formula C8H7CaO3S+ Molecular Weight 223.28 g/mol Form Powder Density 1.33 g/cm³ Melting Point 760 °C Solubility Soluble in water, Lower glycols Calcium Polystyrene Sulfonate Properties /Description
Calcium Polystyrene Sulfonate is generally immediately available in most volumes. Nanochemazone produces many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural, and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research, and safety (MSDS) information are available, as is a Reference Calculator for converting relevant units of measurement.
Related Information:
Please email us for the customization.
Email: contact@nanochemazone.com
Please contact us for customization and price inquiry
Note: We supply different size ranges of Nano and micron as per the client’s requirements and also accept customization in various parameters.
$0.00
