Inquiry Now

Ruthenium Paste for Thick Film Circuits

Product Name	Ruthenium Paste for Thick Film Circuits
CAS No.	14898-67-0
Appearance	Powder/Paste
Purity	≥99.9%
APS	1-15µM (Can be customized)
Ingredient	Ru
Product Code	NCZ-24AV126

Ruthenium Paste for Thick Film Circuits is mainly used in the production and preparation of thick film circuits and related separated components. Product Properties: 1. Physical Properties Recommended Using Process: 1. Stirring: Gently stir well before use. 2. Recommended…

Ruthenium Paste for Thick Film Circuits

PR-Ru-4500 Series is mainly used in the production and preparation of thick film circuits and related separated components.

Product Properties:

Physical Properties

Grade	NCZ-PR-Ru-4500 Series
Solid Content	70-80%
Particle Size (µm)	≤10
Viscosity (Pa.S)	500±100
Benchmarking:
Performance	4511	4521	4531	4541	4551	4561	4571
Electrical Resistivity (Ω/□）±15%	10	100	1K	10K	100K	1M	10M
Temperature Coefficient of Resistance（PPM/℃）	±100	±100	±100	±100	±100	±100	±100
Temperature Coefficient of Resistance（V/mm）	2.8	8.84	28	88	280	400	400
Dipping Solder(△R%)	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5
Noise(dB)	<-25	-20	-10	-5	-5	0	0
Room Temperature Storage(25℃、1000h、△R%）	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5
Hot Flash test（△R%）40℃、94%RH 250h ）	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5
Thermal Stability （△R%）150℃、250h）	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5	±0.5
Temperature Cycle（△R%）-55℃-125℃、5times）	±0.2	±0.2	±0.2	±0.2	±0.2	±0.2	±0.2

Recommended Using Process:

Stirring: Gently stir well before use.
Recommended Printing Thickness: 20±2µm
Mesh Material And Mesh: nylon mesh inch 250-300 mesh

Stainless Steel Wire Mesh: Inch 260-325 Mesh

Drying: After printing, place it in a 150℃ oven or under an infrared light for 15 minutes.
Sintering Process (Recommended): Sintering in tunnel furnace, sintering peak temperature 850℃, peak

Value holding time 10 minutes, sintering cycle 45-60 minutes.

Attention:

Safe use: The paste is harmful if swallowed, inhaled or in contact with the skin, so use wash thoroughly immediately after, avoid contact with eyes, skin or clothing, keep away tinder or burning material. Because it is flammable, cover it tightly when not in use to avoid inhalation of volatilization gas, keep air circulation when using.
This paste is a ready-to-use product and does not need to be diluted. If it needs to be diluted, the amount added should not exceed

3% (weight ratio), too much diluent will directly affect the performance of the slurry.

The thickness of the printed circuit itself should not be less than 4μm, otherwise the electrical conductivity will be unstable.
This slurry should be stored in a cool and dry place between 4~25℃.
Storage period: The original package is sealed for six months.

Ruthenium Paste for Thick Film Circuits Properties /Description

Ruthenium Paste for Thick Film Circuits is generally immediately available in most volumes. Nanochemazone produces many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural, and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research, and safety (MSDS) information are available, as is a Reference Calculator for converting relevant units of measurement.

Related Information:

Storage Conditions:

Airtight sealed, avoid light, and keep dry at room temperature.

Please get in touch with us for customization and price inquiry

Email: contact@nanochemazone.com

Note: We supply different size ranges of Nano and micron as per the client’s requirements and accept customization in various parameters.

Description

Note: For pricing & ordering information, please contact us at sales@nanochemazone.com
Please contact us for quotes on Larger Quantities and customization. E-mail: contact@nanochemazone.com

Customization:

If you are planning to order large quantities for your industrial and academic needs, please note that customization of parameters (such as size, length, purity, functionalities, etc.) is available upon request.

NOTE:

Images, pictures, colors, particle sizes, purity, packing, descriptions, and specifications for the real and actual goods may differ. These are only used on the website for the purposes of reference, advertising, and portrayal. Please contact us via email at sales@nanochemazone.com or by phone at +1-780-612-4177 if you have any questions.

Important Notes

Research Use Only: Nanochemazone materials are intended strictly for research and development purposes in laboratory and industrial settings.
No Refunds or Exchanges: All sales are final. Nanochemazone does not permit exchanges or offer refunds under any circumstances.
Customs & Import Responsibilities: Customs clearance, duties, taxes, and tariffs are the sole responsibility of the consignee/importer. Nanochemazone is not liable for delays, rejections, or any additional costs incurred during the customs process, and such issues will not justify order cancellations or refunds.
Order Cancellations: Once an order is placed, it cannot be cancelled. No refunds will be issued for cancelled or undelivered orders.
Indemnification: The buyer agrees to indemnify and hold harmless Nanochemazone, its affiliates, and personnel from any claims, damages, liabilities, or expenses arising from the use of its products or services.
Terms & Conditions: All orders and communications are subject to Nanochemazone’s standard Terms & Conditions.