Polyether etherketone PEEK Resin Powder
| Product |
Polyether Ether Ketone PEEK Resin Powder
|
| CAS No. |
29658-26-2 |
| Appearance |
Powder |
| Purity |
≥99%, ≥99.9%, ≥95% (Other purities are also available) |
| APS |
1-5 µM, 10-53 µM (Can be customized), Ask for other available size range.
|
| Ingredient |
C19H14O3 |
| Product Code |
NCZ-AE-189 |
DESCRIPTION
1.Mechanical properties of PEEK is a toughness and rigidity, and balance of plastic. Particularly its excellent resistance to alternating stress fatigue is the most outstanding of all plastics can be comparable with the alloy.
2.Self-lubricating plastic PEEK at all with superior sliding properties, suitable for demanding low coefficient of friction and abrasion uses. In particular, carbon fiber, graphite mixing proportion of each of the modified PEEK better self-lubricating properties.
3.Chemical resistance (corrosion resistance) PEEK has excellent chemical resistance in the usual chemicals that can dissolve or destroy it’s only concentrated sulfuric acid, its corrosion resistance and nickel steel similar.
4.PEEK is a very stable flame-retardant polymer,1.45mm thick sample, without any flame retardant can achieve the highest standards.
5.The peeling resistance of PEEK peeling resistance is very good, it can be made of or coated with a thin wire, may be used in harsh conditions.
6.The fatigue resistance of PEEK resin at all has the best fatigue resistance.
7.The radiation resistance of high radiation are strong, more than a common resin best radiation resistance of polystyrene. Radiation does can be made up 1100Mard can still maintain good insulation, high-performance.
8.Hydrolysis resistance PEEK and its composites and high-press steam from water, the chemical effects of this material products made of continuous use at high temperature and pressure water can be still maintain excellent properties.
9.PEEK resin has a higher melting point (334℃) and glass transition temperature (143℃), continuous use temperature of 260℃, its 30% GF or CF-reinforced grades load thermal deformation temperature up to 316℃.
RELATED INFORMATION
Storage Conditions:
Airtight sealed, avoid light, and keep dry at room temperature.
Please email us for the customization.
Email: contact@nanochemazone.com
